Den här sidan är utskriven från Högskolan i Halmstads webbplats (www.hh.se). Texten uppdaterades senast den 2014-03-24. Besök webbplatsen om du vill vara säker på att läsa den senaste versionen.

Bengt-Göran Rosén



Forskningsmiljö:
arrow Maskinteknisk produktframtagning (MTEK)


Länkar:
arrow Hemsida

Publikationer:
arrow Registrerade publikationer i DiVA


  • Artikel i tidskrift
  • Sabina, Rebeggiani, Rosén, Bengt-Göran (2014). Quantitative evaluation of the surface finish of high gloss polished tool steels. Surface Topography: Metrology and Properties, 2 (1). Se post i DiVAlänk till annan webbplats
  • Dimkovski, Zlate, Ohlsson, Robert, Rosén, Bengt-Göran (2014). Effect of the measurement size on the robustness of the assessment of the features specific for cylinder liner surfaces. Surface Topography: Metrology and Properties, 2 (1), s. 014013 - . Se post i DiVAlänk till annan webbplats
  • Rebeggiani, Sabina, Rosén, Bengt-Göran (2013). Factors influencing the surface quality of polished tool steels. Surface Topography: Metrology and Properties. (Submitted) Se post i DiVAlänk till annan webbplats
  • Dimkovski, Zlate, Cabanettes, Frédéric, Löfgren, Hans, Anderberg, Cecilia, Ohlsson, Robert, Rosén, Bengt-Göran (2012). Optimisation of Cylinder Liner Surface Finish by Slide Honing. Proceedings of the Institution of mechanical engineers. Part B, journal of engineering manufacture, 226 (4), s. 575 - 584. Se post i DiVAlänk till annan webbplats
  • Thomas, Tom R., Rosén, Bengt - Göran, Zahouani, Hassan, Blunt, Liam, El Mansori, Mohamed (2011). Traceology, quantifying finishing machining and function : A tool and wear mark characterisation study. Wear, 271 (3-4), s. 553 - 558. Se post i DiVAlänk till annan webbplats
  • Rosén, Bengt Göran, Garnier, Jérôme (2011). Uncertainties and optimized sampling in surface roughness characterization. Wear, 271 (3-4), s. 610 - 615. Se post i DiVAlänk till annan webbplats
  • Rebeggiani, Sabina, Rosén, Bengt-Göran, Sandberg, Alf (2011). A quantitative method to estimate high gloss polished tool steel surfaces. Journal of Physics, Conference Series, 311 (1). Se post i DiVAlänk till annan webbplats
  • Johansson, Staffan, Nilsson, Per, Ohlsson, Robert, Rosén, Bengt-Göran (2011). Experimental friction evaluation of cylinder liner/piston ring contact. Wear, 271 (3-4), s. 625 - 633. Se post i DiVAlänk till annan webbplats
  • Dimkovski, Zlate, Bååth, Lars, Rosén, Stefan, Ohlsson, Robert, Rosén, Bengt-Göran (2011). Interference Measurements of Deposits on Cylinder Liner Surfaces. Wear, 270 (3-4), s. 247 - 251. Se post i DiVAlänk till annan webbplats
  • Dimkovski, Zlate, Anderberg, Cecilia, Ohlsson, Robert, Rosén, Bengt - Göran (2011). Characterisation of worn cylinder liner surfaces by segmentation of honing and wear scratches. Wear, 271, s. 548 - 552. Se post i DiVAlänk till annan webbplats
  • Berglund, Johan, Wiklund, Daniel, Rosén, Bengt-Göran (2011). A Method for Visualization of Surface Texture Anisotropy in Different Scales of Observation. Scanning, 33 (5), s. 325 - 331. Se post i DiVAlänk till annan webbplats
  • Berglund, Johan, Liljengren, Magnus, Rosén, Bengt-Göran (2011). On finishing of pressing die surfaces using machine hammer peening. The International Journal of Advanced Manufacturing Technology, 52 (1-4), s. 115 - 121. Se post i DiVAlänk till annan webbplats
  • Johansson, S., Frennfelt, C., Killinger, A., Nilsson, P.H., Ohlsson, R., Rosén, Bengt - Göran (2010). Frictional evaluation of thermally sprayed coatings applied on the cylinder liner of a heavy duty diesel engine : pilot tribometer analysis and full scale engine test. Wear, 273 (1), s. 82 - 92. Se post i DiVAlänk till annan webbplats
  • Berglund, Johan, Brown, Christopher A., Rosén, Bengt-Göran, Bay, Niels (2010). Milled die steel surface roughness correlation with steel sheet friction. CIRP annals, 59 (1), s. 577 - 580. Se post i DiVAlänk till annan webbplats
  • Berglund, J., Agunwamba, C., Powers, B., Brown, C. A., Rosén, Bengt Göran (2010). On discovering relevant scales in surface roughness measurement : an evaluation of a band-pass method. Scanning, 32 (4), s. 244 - 249. Se post i DiVAlänk till annan webbplats
  • Wiklund, D., Rosén, Bengt Göran, Wihlborg, A. (2009). A friction model evaluated with results from a bending-under-tension test. Tribology International, 42 (10), s. 1448 - 1452. Se post i DiVAlänk till annan webbplats
  • Thomas, T.R., Rosén, Bengt Göran (2009). Surfaces generated by abrasive finishing processes as self-affine fractals. International Journal of Surface Science and Engineering, 3 (4), s. 275 - 285. Se post i DiVAlänk till annan webbplats
  • Dimkovski, Zlate, Anderberg, Cecilia, Rosén, Bengt-Göran, Ohlsson, Robert, Thomas, Tom (2009). Quantification of the cold worked material inside the deep honing grooves on cylinder liner surfaces and its effect on wear. Wear, 267 (12), s. 2235 - 2242. Se post i DiVAlänk till annan webbplats
  • Cabanettes, Frédéric, Claret-Tournier, Julien, Mohlin, Johan, Nilsson, P.-H., Rosén, Bengt-Göran, Xiao, L. (2009). The evolution of surface topography of injection cams. Wear, 266 (5-6), s. 570 - 573. Se post i DiVAlänk till annan webbplats
  • Berglund, J., Rosén, Bengt Göran (2009). A method development for correlation of surface finish appearance of die surfaces and roughness measurement data. Tribology letters, 36 (2), s. 157 - 164. Se post i DiVAlänk till annan webbplats
  • Anderberg, Cecilia, Pawlus, P., Rosén, Bengt-Göran, Thomas, T. R. (2009). Alternative descriptions of roughness for cylinder liner production. Journal of Materials Processing Technology, 209 (4), s. 1936 - 1942. Se post i DiVAlänk till annan webbplats
  • Zahouani, Hassan, Rosén, Bengt-Göran, Thomas, Tom R. (2008). 10th International Conference on Metrology & Properties of Engineering Surfaces : Guest editorial. Wear, 264 (5-6), s. 381 - 381. Se post i DiVAlänk till annan webbplats
  • Wiklund, Daniel, Rosén, Bengt-Göran, Gunnarsson, Lars (2008). Frictional mechanisms in mixed lubricated regime in steel sheet metal forming. Wear, 264 (5-6), s. 474 - 479. Se post i DiVAlänk till annan webbplats
  • Thomas, Tom, Rosén, Bengt-Göran (2008). Implementation of Whitehouse's method for calculating properties of self-affine fractal profiles. Proceedings of the Institution of mechanical engineers. Part C, journal of mechanical engineering science, 222 (8), s. 1547 - 1550. Se post i DiVAlänk till annan webbplats
  • Rosén, Bengt Göran, Anderberg, C., Ohlsson, R. (2008). Parameter correlation study of cylinder liner roughness for production and quality control. Proceedings of the Institution of mechanical engineers. Part B, journal of engineering manufacture, 222 (11), s. 1475 - 1487. Se post i DiVAlänk till annan webbplats
  • Johansson, Staffan, Nilsson, Per H., Ohlsson, Robert, Anderberg, Cecilia, Rosén, Bengt-Göran (2008). New cylinder liner surfaces for low oil consumption. Tribology International, 41 (9-10), s. 854 - 859. Se post i DiVAlänk till annan webbplats
  • Xiao, Li, Björklund, Stefan, Rosén, Bengt Göran (2007). The influence of surface roughness and the contact pressure distribution on friction in rolling/sliding contacts. Tribology International, 40 (4), s. 694 - 698. Se post i DiVAlänk till annan webbplats
  • Rosén, Bengt-Göran, Blunt, Liam A., Thomas, Tom R. (2005). On in-vivo skin topography metrology and replication techniques. Journal of Physics, Conference Series, 13 (1), s. 325 - 329. Se post i DiVAlänk till annan webbplats
  • Xiao, Li, Rosén, Bengt-Göran, Amini, Naser (2004). Surface lay effect on rough friction in roller contact. Wear, 257 (12), s. 1301 - 1307. Se post i DiVAlänk till annan webbplats
  • Wiklund, Daniel, Wihlborg, Anders, Rosén, Bengt-Göran (2004). Evaluation of surface topography parameters for friction prediction in stamping. Wear, 257 (12), s. 1296 - 1300. Se post i DiVAlänk till annan webbplats
  • Rosén, Bengt Göran, Wennerberg, Ann, Rosén, Stefan (2004). Topographical characterisation of artificial femoral heads : a Benchmarking study. Wear, 257 (12), s. 1275 - 1280. Se post i DiVAlänk till annan webbplats
  • Xiao, Li, Rosén, Bengt-Göran, Amini, Naser, Nilsson, Per H. (2003). A study on the effect of surface topography on rough friction in roller contact. Wear, 254 (11), s. 1162 - 1169. Se post i DiVAlänk till annan webbplats
  • Kapitel i bok, del av antologi
  • Wennerberg, Ann, Rosén, Bengt-Göran, Albrektsson, Tomas (2012). Surface Topography and Measuring Techniques for Dental Implant Applications : Possibilities and obstacles. Implant Dentistry Research Guide : Basic, Translational and Clinical Research. Nova Science Publishers, Inc., New York, NY. S. 33 - 50. Se post i DiVAlänk till annan webbplats
  • Konferensbidrag
  • Rebeggiani, Sabina, Rosén, Bengt-Göran (2013). Quantitative evaluation of the surface finish of high gloss polished tool steels. Metrology and Properties of Engineering Surfaces, 2013 : Proceedings of the 14th International Conference, Taipei, Taiwan, June 17-21, 2013. S. 207 - 218. Se post i DiVAlänk till annan webbplats
  • Dimkovski, Zlate, Ohlsson, Robert, Rosén, Bengt-Göran (2013). Effect of the Measurement Size on the Robustness of the Assessment of the Features Specific for Cylinder Liner Surfaces. Metrology and Properties of Engineering Surfaces, 2013 : Proceedings of the 14th International Conference on Metrology and Properties of Engineering Surfaces. S. 377 - 381. Se post i DiVAlänk till annan webbplats
  • Rosén, Bengt-Göran, Wennerberg, Ann, Jimbo, Ryo (2012). Fractal (scale sensitive) characterisation of dental implant morfology. . Se post i DiVAlänk till annan webbplats
  • Rosén, Bengt-Göran, Bååth, Lars, Dimkovski, Zlate (2012). On Variation of Surface Topography and Robust Product Performance. . Se post i DiVAlänk till annan webbplats
  • Rebeggiani, Sabina, Rosén, Bengt-Göran (2012). A Step-by-Step Analysis of Manual Polishing Sequences. Proceedings of the 9th International Tooling Conference. S. 317 - 324. Se post i DiVAlänk till annan webbplats [ Ladda ner fulltexten ]
  • Johansson, Staffan, Frennfelt, Claes, Nilsson, Per H., Ohlsson, Robert, Rosén, Bengt-Göran (2012). Simulation and experimental analysis of the contact between oil control ring and cylinder liner in a heavy duty diesel engine. . Se post i DiVAlänk till annan webbplats
  • Dimkovski, Zlate, Yoann, Charon, Perrier, Maxime, Cabanettes, Frédéric, Rosén, Bengt-Göran (2012). A Sensitivity Study of the Tribotesting Setup to Rate Different Liner Surfaces. 15th Nordic Symposium on Tribology : NordTrib 2012. Se post i DiVAlänk till annan webbplats
  • Cabanettes, Frédéric, Alessi, J., Bonomi, T., Faure, N., Mohlin, Johan, Rosén, B-G (2012). Testing functional surfaces of heavy duty valve train components under realistic operating conditions. NORDTRIB 15th Nordic Symposium on Tribology, 12-15 June, Trondheim, Norway. Se post i DiVAlänk till annan webbplats
  • Bååth, Lars, Spiech, M., Boerret, R., Harrison, D.K., Rosen, Bengt-Göran (2012). Robot assisted steel polishing and surface characterisation. Proceedings of the 12th international conference of the europeansociety for precision engineering and nanotechnology, June 4th – 7th 2012, Stockholm, Sweden. S. 205 - 208. Se post i DiVAlänk till annan webbplats
  • Bååth, Lars, Rosen, Bengt-Göran (2012). Towards new interferometer technology for surface metrology. Proceedings of the 12th international conference of the europeansociety for precision engineering and nanotechnology, June 4th – 7th 2012, Stockholm, Sweden. S. 158 - 161. Se post i DiVAlänk till annan webbplats [ Ladda ner fulltexten ]
  • Bergman, Martin, Rosén, Bengt-Göran, Eriksson, Lars (2012). Surface appearance and impression. KEER 2012 : Proceedings of the international Conference on Kansei Engineering and Emotion Research, KEER2012. Se post i DiVAlänk till annan webbplats
  • Rosén, B.-G., Bergman, Martin, Skillius, Hans, Eriksson, Lars, Rake, Lance (2011). On linking customer requirements to surfaces : Two Industrial- and Engineering design case studies. . Se post i DiVAlänk till annan webbplats
  • Rebeggiani, Sabina, Rosén, Bengt Göran, Sandberg, Alf (2011). A quantitative method to estimate high gloss polished tool steel surfaces. Proceedings of the 13th International Conference on Metrology and Properties of Engineering Surfaces : 12 – 15 April 2011, Twickenham Stadium, UK. S. 35 - 39. Se post i DiVAlänk till annan webbplats [ Ladda ner fulltexten ]
  • Rebeggiani, Sabina, Rosén, Bengt-Göran (2011). High gloss polishing of tool steels – step by step. Proceedings of The 4th International Swedish Production Symposium. S. 257 - 262. Se post i DiVAlänk till annan webbplats [ Ladda ner fulltexten ]
  • Dimkovski, Zlate, Anderberg, Cecilia, Cabanettes, Frédéric, Löfgren, Hans, Rosén, B.-G. (2011). Influence of Different Cylinder Liner Surfaces on Their Performance with the Twin Land Oil Control Ring in a Car Engine. Proceedings of the 13th International Conference on Metrology and Properties of Engineering Surfaces. Se post i DiVAlänk till annan webbplats
  • Cabanettes, Frédéric, Löfgren, Hans Bertil, Rosén, Bengt-Göran (2011). The impact of manufacturing processes on Automotive Cam/Roller Contact. . Se post i DiVAlänk till annan webbplats
  • Cabanettes, Frédéric, Löfgren, Hans Bertil, Rosén, Bengt-Göran (2011). Evaluation of manufacturing processes for cam/roller contact. . Se post i DiVAlänk till annan webbplats
  • Rosén, Bengt - Göran, Wiklund, D., Liljegren, M., Berglund, J., Bay, Niels, Kjellsson, K. (2010). Friction in Sheet Metal Forming : A Comparison Between Milled and Manually Polished Die Surfaces. . Se post i DiVAlänk till annan webbplats
  • Rosén, Bengt-Göran, Dimkovski, Zlate, Cabanettes, Frédéric, Löfgren, Hans (2010). Controlling variation of topography towards robust surface performance. Proceedings of the 2nd International Conference on Surface Metrology : October 25-27, 2010, Worcester Polytechnic Institute, Worcester, MA, USA. S. 43 - 51. Se post i DiVAlänk till annan webbplats
  • Jonsson, Per, Berglund, Johan, Kjellsson, Kenneth, Rosén, Bengt-Göran (2010). Surface Topography on trimming dies and the influence of wear. Proceedings of the International Deep Drawing Research Group. S. 345 - 354. Se post i DiVAlänk till annan webbplats
  • Zahouani, Hassan, Mezghani, M., El Mansori, M., Rosén, Bengt-Göran, Thomas, Tom (2009). Effect of Hölder Exponent of Roughness in Contact and Dry Friction Problems. Proceedings of the 12th International Conference on Metrology and Properties of Engineering Surfaces. Se post i DiVAlänk till annan webbplats
  • Thomas, T. R., Rosén, Bengt-Göran, Zahouani, Hassan, Blunt, Liam, El Mansori, M. (2009). Traceology, quantifying finishing machining and function : A tool and wear mark characterisation study. Proceedings of the 12th International Conference on Metrology and Properties of Engineering Surfaces. S. 209 - 215. Se post i DiVAlänk till annan webbplats
  • Rosén, Bengt-Göran, Berglund, Johan, Liljengren, Magnus (2009). Machine Hammer Peening : A Substitute for Polishing of Pressing Die Surfaces?. Proceedings of the 3rd Swedish Production Symposium. S. 184 - 189. Se post i DiVAlänk till annan webbplats
  • Rebeggiani, Sabina, Rosén, Bengt-Göran, Sandberg, Alf (2009). Surface characterisation of high gloss polished tool steels. Proceedings of the 8th International Tooling Conference : TOOL 09: Tool Steels – Deciding Factor in Worldwide Production: RWTH Aachen University, Aachen, Germany, June 2–4, 2009: Volume II. S. 953 - 963. Se post i DiVAlänk till annan webbplats
  • Rebeggiani, Sabina, Rosén, Bengt-Göran, Sandberg, Alf (2009). Polished injection moulds’ and surface defects’ influence on the quality of plastic components. Proceedings of the 12th International Conference on Metrology and Properties of Engineering Surfaces. S. 396 - 397. Se post i DiVAlänk till annan webbplats [ Ladda ner fulltexten ]
  • Rebeggiani, Sabina, Behrens, Barbara, Klocke, Fritz, Zunke, Richard, Rosén, Bengt-Göran (2009). Towards robust polishing strategies for moulds and dies. Proceedings of the 3<sup>rd</sup> Swedish Production Symposium, Göteborg, Sweden, 2-3 December 2009 (SPS09). Se post i DiVAlänk till annan webbplats [ Ladda ner fulltexten ]
  • Johansson, Staffan, Nilsson, Per, Ohlsson, Robert, Rosén, Bengt-Göran (2009). Experimental friction evaluation of cylinder liner/piston ring contact : Results. Proceedings of the 12th International Conference on Metrology and Properties of Engineering Surfaces. S. 193 - 199. Se post i DiVAlänk till annan webbplats
  • Johansson, Staffan, Nilsson, Per H., Ohlsson, Robert, Rosén, Bengt-Göran (2009). Experimental friction evaluation of cylinder liner/piston ring contact : Methods and approach. . Se post i DiVAlänk till annan webbplats
  • Dimkovski, Zlate, Ohlsson, Robert, Rosén, Stefan, Rosén, B.-G. (2009). Characterisation of transparent deposits on cylinder liner surfaces of HDD truck engines. . Se post i DiVAlänk till annan webbplats
  • Dimkovski, Zlate, Anderberg, Cecilia, Ohlsson, Robert, Rosén, Bengt-Göran (2009). Characterisation of Worn Cylinder Liner Surfaces by Segmentation of Honing and Wear Scratches. Proceedings of the 12th International Conference on Metrology and Properties of Engineering Surfaces : July 8th - 10th 2009, Rzeszo´w, Poland. S. 187 - 192. Se post i DiVAlänk till annan webbplats
  • Cabanettes, Frédéric, Mohlin, Johan, Rosén, Bengt-Göran (2009). Experimental study of cam/roller wear using advanced characterization tools for relocated surfaces. Proceedings of the 3rd Swedish production symposium. S. 197 - 203. Se post i DiVAlänk till annan webbplats
  • Cabanettes, Frédéric, Anderberg, Cecilia, Dimkovski, Zlate, Rosén, Bengt-Göran (2009). Optimizing the Manufacturing of Driveline Surfaces Roughness Parameters and Rough Contact Modeling. Proceedings of the 12th International Conference on Metrology and Properties of Engineering Surfaces : July 8th - 10th 2009, Rzeszo´w, Poland. Se post i DiVAlänk till annan webbplats
  • Anderberg, Cecilia, Cabanettes, Frederic, Dimkovski, Zlate, Rosén, Bengt-Göran (2009). Liner Surface Improvements for Low Friction Piston Ring Packs. Society of Tribologists and Lubrication Engineers annual meeting &amp; exhibition 2009 : Lake Buena Vista, Florida, USA, 17 - 21 May 2009. S. 455 - 459. Se post i DiVAlänk till annan webbplats
  • Rosén, Bengt-Göran (2008). Towards optimal sampling of surface roughness. Proceedings / XII. International Colloquium on Surfaces January 28th and 29th, 2008, Chemnitz, Germany = XII. Internationales Oberflächenkolloquium. S. 383 - 392. Se post i DiVAlänk till annan webbplats
  • Rebeggiani, Sabina, Rosén, Bengt-Göran (2008). Evaluation of a robot assisted polishing equipment. Proceedings (CD) of the 2nd Swedish Production Symposium; Stockholm, Sweden. S. 6. Se post i DiVAlänk till annan webbplats [ Ladda ner fulltexten ]
  • Dimkovski, Zlate, Anderberg, Cecilia, Strömstedt, Fredrik, Johansson, Staffan, Ohlsson, Robert, Rosén, Bengt-Göran (2008). Towards 3D Characterisation of Cylinder Liner Surfaces. Proceedings / XII. International Colloquium on Surfaces January 28th and 29th, 2008, Chemnitz, Germany = XII. Internationales Oberflächenkolloquium. S. 15 - 24. Se post i DiVAlänk till annan webbplats
  • Dimkovski, Zlate, Anderberg, Cecilia, Rosén, Bengt-Göran, Ohlsson, Robert, Thomas, Tom R. (2008). Quantification of Blechmantel Effect on Wear of Cylinder Bore Microtopography. Proceedings of the 13th Nordic Symposium on Tribology, Nordtrib 2008. S. 13. Se post i DiVAlänk till annan webbplats
  • Dimkovski, Zlate, Anderberg, Cecilia, Ohlsson, Robert, Rosén, Bengt-Göran (2008). Complementing 3D Roughness Parameters for Monitoring of Improved Honing of Cylinder Bores. Proceedings of the Swedish Production Symposium (SPS) - 2008. Se post i DiVAlänk till annan webbplats
  • Cabanettes, Frédéric, Mohlin, Johan, Nilsson, Per Henrik, Rosén, Bengt-Göran (2008). Evaluation of cam surfaces by wear testing and functional characterization. Synopses / 35th Leeds-Lyon Symposium on Tribology. Se post i DiVAlänk till annan webbplats
  • Bååth, Lars B., Abu Dalou, Sadi Khalid, Rose´n, Bengt-Göran (2008). Surface topography with PDI holography. Proceedings of the XII. International Colloquium on Surfaces. S. 10. Se post i DiVAlänk till annan webbplats [ Ladda ner fulltexten ]
  • Berglund, Johan, Rosén, Bengt-Göran (2008). Robust and Easy to Use Quality Control of Roughness on Milled Tool Steel Surfaces. Proceedings of the 18th International Conference on Flexible Automation and Intelligent Manufacturing : FAIM 2008, June 30th – July 2nd, 2008 University of Skövde, Sweden. S. 284 - 289. Se post i DiVAlänk till annan webbplats [ Ladda ner fulltexten ]
  • Berglund, Johan, Rosén, Bengt-Göran (2008). Surface Finish and Roughness Measurement in Die and Mould Manufacturing. Proceedings of the 2'nd Swedish Production Symposium. S. 385 - 391. Se post i DiVAlänk till annan webbplats
  • Berglund, Johan, Jonsson, Per, Rebeggiani, Sabina, Rosén, Bengt-Göran (2008). Measuring strategies for smooth tool steel surfaces. Proceedings : January 28th and 29th, 2008, Germany, Chemnitz = XII. Internationales Oberflächenkolloquium. S. 110 - 119. Se post i DiVAlänk till annan webbplats
  • Rebeggiani, Sabina, Sandberg, Alf, Rosén, Bengt-Göran (2007). Tool steel polishing and topography characterization. The Swedish Production Symposium in Göteborg 28-30 August 2007. Se post i DiVAlänk till annan webbplats [ Ladda ner fulltexten ]
  • Johansson, Staffan, Ohlsson, Robert, Dimkovski, Zlate, Rosén, Bengt-Göran (2007). Manufacturing mechanisms of cylinder liner surface roughness. Proceedings of the 11th International Conference on Metrology and Properties of Engineering Surfaces. Se post i DiVAlänk till annan webbplats
  • Dimkovski, Zlate, Allard, Nicolas, Anderberg, Cecilia, Strömstedt, Fredrik, Johansson, Staffan, Rosen, Bengt-Göran, Ohlsson, Robert (2007). Cylinder Liner Honed Surface Optimisation-a Manufacture-Characterisation-Function Study. Proceedings of the 1st Swedish Production Symposium. S. 9. Se post i DiVAlänk till annan webbplats
  • Cabanettes, Frédéric, Claret-Tournier, Julien, Mohlin, Johan, Nilsson, Per Henrik, Rosén, Bengt-Göran, Xiao, Li (2007). The evolution of surface topography of injection cams. Proceedings of the 11th International Conference on Metrology and Properties of Engineering Surfaces : July 17th - 20th 2007, Huddersfield, UK. Se post i DiVAlänk till annan webbplats
  • Wiklund, Daniel, Nilsson, Larsgunnar, Nilsson, Bertil, Andersson, Alf, Rosén, Bengt Göran, Gunnarsson, Lars (2006). On the Implementation and Evaluation of a Roughness Based Friction Model in FE Simulations of Sheet Metal Forming. Proceedings of The 12th Nordic Symposium on Tribology. Se post i DiVAlänk till annan webbplats
  • Anderberg, Cecilia, Cabanettes, Frederic, Dimkovski, Zlate, Ohlsson, Robert, Rosén, Bengt-Göran (2006). Cylinder Liners and Consequences of Improved Honing. . S. 13. Se post i DiVAlänk till annan webbplats [ Ladda ner fulltexten ]
  • Anderberg, Cecilia, Cabanettes, Frederic, Dimkovski, Zlate, Ohlsson, Robert, Rosen, Bengt-Göran (2006). Combined SEM and Stylus Profiling Sensoring for Improved Cylinder Liner Honing. Proceedings of Austrib 06 - International Tribology Conference. S. 6. Se post i DiVAlänk till annan webbplats
  • Xiao, L., Rosén, Bengt Göran, Nilsson, P. H., Kalin, M., Vižintin, J. (2005). Rolling and rolling-to-sliding contact behaviour of DLC coatings. Life cycle tribology : proceeding of the 31st Leeds-Lyon symposium on tribology held at Trinity and All Saints College, Horsforth, Leeds, UK, 7th-10th September 2004. S. 213 - 220. Se post i DiVAlänk till annan webbplats
  • Wiklund, Daniel, Wihlborg, Anders, Rosén, B.-G. (2002). A Comparative Surface Topography Study of FEM Simulation and Surface Indentation Tests (SIT) on Friction Prediction in Steel Sheet Forming. Papers presented at the 10th Nordic Symposium on Tribology : NORDTRIB 2002, Stockholm, Sweden, 9-12 June 2002. Se post i DiVAlänk till annan webbplats
  • Wihlborg, A., Wiklund, D., Rosén, B-G. (2002). Surface indentation test (SIT) for friction prediction in mixed lubrication of coated sheets. Boundary and mixed lubrication : science and application. Proceedings of the 28th Leeds-Lyon symposium on tribology. S. 461 - 466. Se post i DiVAlänk till annan webbplats
  • Wihlborg, Anders, Wiklund, Daniel, Rosén, Bengt-Göran (2001). The Influence of Lubricants Kinematic Viscosity and Steel Sheet Surface-Topography in a Bending Under Tension Friction Test. Tribology 2001 - scientific achievements, industrial applications, future challenges : plenary and session key papers from the 2nd World Tribology Congress ; Vienna, Austria, 3-7 September 2001. Se post i DiVAlänk till annan webbplats
  • Proceedings (redaktörskap)
  • Pawlus, Pawel., Blunt, Liam., Rosén, Bengt-Göran., Thomas, Tom., Michal, Wieczorowski. (2009) (ed.). Proceedings of the 12th International Conference on Metrology and Properties of Engineering Surfaces. Rzeszóv University of Technology, Rzeszóv, Poland. 400 s. Se post i DiVAlänk till annan webbplats
  • Blunt, Liam., Rosén, Bengt-Göran., Thomas, Tom., Jiang, Xiangqian., Whitehouse, David. (2007) (ed.). Proceedings of the 11th International Conference on Metrology and Properties of Engineering Surfaces : July 17th - 20th 2007, Huddersfield, UK. University of Huddersfield, Huddersfield. 377 s. Se post i DiVAlänk till annan webbplats
  • Rapport
  • Rögnvaldsson, Thorsteinn, Brink, Joachim, Florén, Henrik, Gaspes, Verónica, Holmgren, Noél, Nilsson, Pernilla, Olsfelt, Jonas, Svensson, Bertil, Ericsson, Claes, Gustafsson, Linnea, Hoveskog, Maya, Hylander, Jonny, Jonsson, Magnus, Nygren, Jens, Rosén, Bengt-Göran, Sandberg, Mikael (2014). ARC13 : Assessment of Research and Coproduction : Reports from the assessment of all research at Halmstad University 2013. Halmstad University Press, Halmstad. 110 s. Se post i DiVAlänk till annan webbplats [ Ladda ner fulltexten ]
Bild på Bengt-Göran Rosén

Kontaktinformation
Sektion/Enhet:
Sektionen för ekonomi och teknik

Befattning:
Professor Maskinteknik

Hus / Rum:
Hus P / 345

Telefon:
+46 (0) 35 16 76 04

Mobiltelefon:
073-033 52 72

E-post:

Sidan uppdaterad 2014-03-24